Johnson Controls DHR18CSB21S, Руководство по обслуживанию

Страница: 24 / 93

1
5
- button

Preset temperature can be decreased by pressing this button. Pressing and holding this
button for more than 2 seconds
will quickly adjust the temperature until released
. The
temperature adjustment is unavailable under the Auto mode.
Celsius
setting range: 16
°
C
~30
°C
; Fahrenheit scale setting range 61
°F
~86
°F
.
+ button

Preset temperature can be increased by pressing this button. Pressing and holding this
button for more than 2 seconds can make the temperature changed quickly until release
the button and then transmit this order. The temperature adjustment is unavailable under
the Auto mode, but the order can be sent by pressing this button.
Celsius
setting range:
16~30; Fahrenheit scale setting range 61~86.
FAN button

By pressing this button, Auto, Low, Middle, High speed
s
can be selected. After power on,
Auto fan speed is default.

Low speed

Middle speed

High speed
Note: Under the DRY mode, the fan will be kept running at the low spe ed and the fan speed
isn't adjustable.
SWING
UP/DOWN
button

Press this button to set up the swing angle, which changes as below:

When the guide louver starts to swing up and down, if SWING functions are canceled, the
air guide louver will stop and remains at the current position.

Indicates the guide louver swings up and down among those five directions
(Simplified SWING function applicable for some Fan Coil Units: When the wireless
remote controller is energized initially with the unit under the OFF status, it should be set
by pressing the + button and the SWING button simultaneously, with the symbol
blinking twice. Then, after the unit is turned on, this function can be activated by pressing
the SWING button, with the displayed symbol indicating swing function is on
. If the
swing symbol is not showing, then the function is turned off.
.
CLOCK
button

By pressing this button, the clock is allowed to be set, with blinking, and then press
the +/- button to adjust the clock. If the +/-button is
held
down for more than 2 seconds,
the clock setting will be increased or decreased 10 minutes every 0.5 seconds. After that,
another press on the CLOCK button accepts the setting. 12:00 is
displayed
, when the
wireless remote controller is
powered up for the first time
.
TIMER ON
button

When TIMER ON is activated, ON will blink while the symbol will disappear. Within 5
seconds it is allowed to set the ON time by pressing the +/- button. Each press will make
the time increase or decrease one minute.
If the +/- button is held down, the time will
change quickly in single minute increments to begin with, then in 10 minute increments.
After the desired time value is set, press
TIMER
ON again to conf
i
rm the setting within five
seconds. After that, another press on TIMER ON will cancel the setting.
Prior to the timer
set up, the current time must be set for the timer to work correctly.
Service Manual