Johnson Controls DHR18CSB21S Скачать руководство пользователя страница 33

Страница: 33 / 93

Service Manual

.4 Memory Function

Press Mode and ▲ buttons at the same time for 5s under off state of the unit to turn on or cancel

memory function. If memory function is set,

is displayed. If not, indoor unit is defaulted to be off

after power recovery.

If memory function is set, indoor unit will resume original setting state after power failure and then

power recovery.

Note:

Do not turn off power to the system immediately after activating/deactivating the memory function

as this may result in improper operation.

.5 Door Control Function/

Occupancy

Function

When door control function is selected, the wired

zone

controller will work when the room card is

inserted and stop working when the room card is

removed

; when

occupancy

function is selected, the

wired

controller will work when it senses there is somebody in the room and stop working when it senses

there is nobody in the room. When the door control function senses the room card is not inserted or

occupancy

function senses there is nobody in the room, the wired

zone

controller will display

icon.

These two functions cannot be used at the same time.

Note:

①

In long-distance monitoring or centralized control, no matter the room card is inserted or not,

the ON/OFF of unit can be controlled. If long-distance monitoring or centralized control

information is received when the room card is not inserted,

icon is cleared. When the

card is reinserted, door control function is judged to be turned on. If long-distance monitoring

or centralized control information is received when the room card is inserted,

the indoor unit

will

maintain its

original status.

②

The unit can not be controlled by

the wired zone controller

when the card is not inserted.

③

When door control function and

occupancy

function have been set at the same time,

only the

door control function will be operational.

Changing from Fahrenheit to

Celsius

Under off state of the unit, press Mode and ▼ buttons at the same time for 5s to switch between

Fahrenheit and

Celsius

.7 Ambient Temperature

Under off or on state of the unit, press it for 5s to view the ambient temperature. In this case, timer

zone displays ambient temperature type 01 or 02. Ambient temperature zone displays the corresponding

temperature of that type. 01 stands for outdoor ambient temperature and 02 stands for the indoor ambient

temperature after compensation. Press Mode button to switch between 01 and 02. Pressing other buttons

except Mode button or receiving remote control signal will exit enquiry state. If there is no operation within

20s will also exit enquiry state.

Содержание DHR18CSB21S






























































































Результаты поиска

Содержание DHR18CSB21S

Отзывы:

Похожие инструкции для DHR18CSB21S

Бренды по названию

Популярные бренды

Johnson Controls DHR18CSB21S, Руководство по обслуживанию

Результаты поиска

Содержание DHR18CSB21S

Отзывы:

Похожие инструкции для DHR18CSB21S

Бренды по названию

Популярные бренды