Deleting an Existing Password
To delete an existing password entry, the
password to be deleted must be used to enter
the user menu system. Select the
Delete
Password
option from the
Password Setup
menu, and tap
OK
to confirm that you want to
delete the existing password entry.
Purging All Passwords
In the event a previously entered password
is forgotten, the user may purge all password
entries at any time using the
Purge All
option.
Display Setup
The
Display Setup
menu provides support
for configuring all of the display settings on
the CMS-1655. This includes configuring the
Safety Halo™ settings, selecting the display
mode based on the number of parameters
or controllers being monitored, adjusting the
display brightness, and setting the system
time and date. Each of these
Display Setup
menu options is discussed in more detail in
the following sections.
Configuring the Safety Halo™
The Safety Halo™ option on the
Display
Setup
menus allows the configuration of
the settings for the Safety Halo™ status
indicating bezel, including the
Nightly Auto-
Dim
feature. This feature allows the Safety
Halo™ indicator to automatically reduce its
brightness to the specified percentage at the
specified
Starting Hour
, and return to normal
brightness at the specified
Ending Hour
.
To configure the Safety Halo™ settings, select
the Safety Halo™ option from the
Display
Setup
menu, which invokes the
Safety Halo™
Settings
configuration screen. The Safety
Halo™ feature may be enabled or disabled
by selecting the corresponding radio button.
If enabled, the normal intensity level may be
varied between one percent and 100 percent.
This is the intensity of the Safety Halo™
illuminated bezel during normal operating
hours if
Nightly Auto-Dim
is enabled, or
continuously otherwise.
To configure the Safety Halo™ feature to
reduce in brightness intensity during evening
hours or otherwise, select the
Nightly Auto-
Dim
radio button and adjust the
Dimmed
Level
between zero percent and 100 percent.
To turn off the Safety Halo™ during the
Nightly Auto-Dim
period, set the dimmed
level to zero percent. Tap the
Next
button to
proceed to the next
Safety Halo™ Settings
screen where the starting and ending hours of
the
Dimmed Period
may be specified.
For example, to configure the Safety Halo™
feature to reduce in brightness intensity to the
dimmed level between 7:00 pm and 6:00 am
every day, set the
Starting Hour
to 19 and the
Ending Hour
to 6. In this example, the Safety
Halo™ status indicating bezel will reduce in
intensity at 7:00 pm every night, and return to
normal intensity at 6:00 am every morning.
Selecting Display Mode
The
Display Mode
option on the
Display
Setup
menu allows the units main display
to be configured based on the number of
parameters or stations being monitored by the
CMS-1655. Selecting this option invokes the
Select Display Mode
configuration screen as
shown below in
Figure 26
.
Fig. 26 Select Display Mode
Selecting Display Brightness
Selecting the
Set Brightness
option on
the
Display Setup
menu invokes the
Set
Backlighting Level
configuration screen as
shown below in
Figure 27
. To increase the
brightness of the display, move the slider to
the right. Moving the slider to the left reduces
the brightness down to a minimum level that
remains visible. Tapping the
OK
button stores
the new brightness setting to non-volatile
memory, which allows the display to return to
this brightness level even if a power loss is
experienced.
SUBHEAD
Due to continuous improvement, JCI reserves the right to change product specifications without notice.
-
14
-
PROGRAMMING MANUAL
