Unit Setup
The CMS-1655 is capable of monitoring and
displaying up to four parameters total, from up
to four individual JCI controllers. These four
parameters may all be from one controller
or from multiple controllers. The
Unit Setup
menu shown in
Figure 14
provides support
for 1) selecting the individual controllers to
be monitored, 2) configuring the subnetwork
address of the central monitoring station, and
3) configuring the audible alarm settings.
The
Monitor Setup
option allows the user to
select the number of stations or parameters
to monitor as well as the subnetwork
addresses for each. Up to four parameters
may be monitored on any combination of
up to four controllers. The
Network Setup
option provides support for configuring the
subnetwork address for the CMS-1655. The
Audible Alert
option provides support for
configuring the settings associated with the
alarm facility integrated in the CMS-1655.
Configuring Monitor Settings
The
Monitor Setup
option on the
Unit Setup
menu invokes the configuration screen shown
in
Figure 15
, which allows the user to specify
the monitoring mode of the CMS-1655.
Single Station Monitor
should be selected
if a single controller is being monitored.
If multiple parameters at a single station
need to be monitored, then the monitor
mode should be specified for the number of
parameters being monitored. For example, if
monitoring differential pressure, temperature
and humidity at an FMS-1650/55 controller,
then
Triple Station Monitor
mode should be
selected.
Tapping the
Next
button at the
Select Monitor
Mode
configuration screen invokes the next
screen based on the monitor mode selected.
Selecting
Single Station Monitor
mode would
invoke a configuration screen that allows the
subnetwork address for the single controller
to be specified.
In the example shown in
Figure 15
, selecting
Quad Station Monitor
mode invokes the
Quad Monitor Setup
configuration screen
shown in
Figure 16
being displayed. At
this configuration screen, the subnetwork
address(es) for the station(s) being monitored
may be specified using the address slider(s).
If all four parameters are on the same station,
then the same subnetwork address would be
specified for all four stations.
SUBHEAD
Due to continuous improvement, JCI reserves the right to change product specifications without notice.
-
10
-
PROGRAMMING MANUAL
Fig. 15 Select Monitor Mode
Fig. 16 Quad Monitor Setup
Fig. 14 Unit Setup
