Johnson & Johnson BPL II, Инструкция по эксплуатации

Страница: 55 / 76

Lubricating the attachments
After each use lubricate all moving parts of the
attachment with 1 drop of Synthes Special Oil
(519.970) (Fig. 1).
Spread the oil by moving the components. Wipe off
excess oil with a cloth.
Insert 1 drop of Synthes Special Oil (519.970) in the
gap between the seal ring and shaft of the attach-
ment coupling (Fig. 2). Connect the attachment to
the Battery Reamer/Drill II and let it run while the
attachment tip is facing downward.
For further information on lubrication, please refer to
the Instruction for Use of the Synthes Special Oil
519.970 (60099544) and the BPLII Care and Main-
tenance Poster (038.000.317)
Figure 1
Notes:
–
To ensure a long service life and reduce repairs,
the handpieces, attachments and battery cas-
ings must be lubricated after each use.
–
Only lubricate the handpieces, battery casings
and attachments when clean.
–
Exception:
The Radiolucent Drive (511.300)
does not require lubrication.
–
The power tools and attachments may only be
lubricated with Synthes Special Oil (519.970).
No oil from other manufacturer may be used.
Lubricants with other compositions may cause
jamming, have a toxic effect or have a negative
impact on the sterilization results.
Figure 2
Battery Power Line II Instructions for Use
DePuy Synthes
53
Quick Coupling for Kirschner Wires and for Pins
Ø 1.5 – 4.0 mm (530.791)
Quick Coupling for Pins Ø 3.2 mm (530.796)