John Lewis TENOR, Инструкция по эксплуатации

Страница: 15 / 18

29 28
- Set format
- Set timezone
- Daylight savings
- Standby Format.
Set time/date
This option is for manually setting the time and date displayed. The time
displays as hh:mm, with the first value, hh, active (flashing). Adjust each
value using the select control button and press Select to confirm. The
next value then becomes active and flashes. The date values follow and
are set in the same way.
!
NOTE: The date and time are displayed as dd-mm-yyyy and hh:mm
AM/PM with the first value, dd active (flashing).
Auto-update
Auto-update works with data sent over DAB, FM or Network. The
clock is only selected when in a corresponding mode, so it is best to
select a mode you use regularly.
Select from the following options: Update from DAB I Update from FM
I Update from Network I No Update
Set format
To change between 12 and 24 hour display, select Set 12/24 hour and
then select your preference.
Standby format
Select either Analog or Digital clock display for when Tenor enters standby
The default language is English. To change, select
Menu > System settings > Language > Select your language.
A factory reset resets all user settings to default values, meaning that
time and date information, network configurations and presets are lost.
However, the radio’s current software version is maintained, as is regis-
tration with the Internet radio portal. Internet radio favorites therefore
remain unless you re-register your radio with another account on the
portal website.
To perform a factory reset, select
Menu > System settings > Factory
reset proceed > Yes.
From time to time, Tenor may make software upgrades available with
bug fixes or additional features. You can either check for updates
manually, or set Tenor to automatically check on a periodical basis
(this is the default option).
If Tenor detects that newer software is available, it will ask if you want
to go ahead with an update. If you agree, new software will download
and install. Your user settings will remain the same.
!
CAUTION: before starting a software upgrade, please ensure that
Tenor is plugged into a stable mains power connection. Disconnecting
power during a software update may permanently damage the unit.
To turn automatic checking on or off, select
Menu > System settings > Software update > Auto-check setting.
See page 7
Tenor has a backlight with three brightness settings, and adjustable
timeout (this is the time delay, in seconds, after which the display
switches to the Dim level).
There are three settings:
Timeout - Light On 10 I 20 I 30 I 45 I 60 I 90 I 120 I 180 I sec.
On level - High I Mid I Low.
Dim level - Medium I Low I Very low I Off
Backlight
Language
Factory reset
Software updates
Setup Wizard