7
6
The buttons on the remote control replicate the main controls on the
Tenor music system, but also have the following additional functions.
Power
Press to turn the Tenor on and off.
Source
Press to select different audio sources.
Alarm 1 and Alarm 2
Press to set up an alarm on the Tenor.
Sleep
When audio is playing, press to return to a preset sleep time
or open the sleep menu.
- When an alarm sounds, press the Snooze button to set the snooze
interval.
REP (Repeat)
When playing a CD, press once to repeat the playing track. Press
twice to repeat the entire disc. Press again to cancel the repeat
function. You cannot use the repeat function in conjunction with
the shuffle function.
Shuffle
When playing a CD, press to play tracks in a random order.
Press again to cancel the shuffle function.
In internet radio, my music, Bluetooth or CD mode,
press to play or pause audio.
In FM mode, press to auto-scan for stations.
Press + or - to adjust volume while playing audio.
Press + or - to select menu for settings.
Press left or right to change audio sources.
When playing audio, press left or right to select CD tracks
FM or DAB.
Preset numbers 1 to 10+ on the keypad.
- To save a preset, tune into your preferred station on DAB, FM or
Internet Radio and long press preset button 1, to 10
- To recall a preset, short press button 1, to 10 and the stored station
will play.
- Use the 10+ button to access presets 11-20. Once pressed,
the 10+ button makes the 1-10 keypad represent presets 11-20.
The same process can then be used to save and recall a preset.
Remote control
P (Preset)
You can also access all presets using the ‘P’ button
To save a preset, tune in your preferred station on DAB, FM or
Internet Radio and long press the ‘P’ button, this brings up the
digital preset menu. By using the NAVIGATION buttons you can
navigate to any of the 1-20 presets, use the SELECT button to
save the current station to your chosen preset.
- To recall a preset, short press the ‘P’ button to bring up the digital
preset menu, by using the NAVIGATION buttons you can navigate
to any of the 1-20 presets, use the SELECT button to select and
play your chosen preset.
1 Place the Tenor on a suitable shelf or table.
2 Extend the telescopic aerial.
3 Connect the power cord between the Tenor and the mains supply.
(100-240V)
4 To play internet radio you will need a wireless (Wi-Fi) network
or LAN connection with the appropriate permissions, including
a password if required.
5 Press NAVIGATION dial or the remote control POWER button to
turn on.
When the Tenor starts for the first time, it runs through a setup wizard
to configure settings for the date, time and Wi-Fi network, these steps
are listed below. Once this has finished, the system is ready to use.
Select Set 12/24 hour and then choose your display preference.
Auto-update works with data sent over DAB, FM or the internet. The
clock is only updated when in a corresponding mode, so it is best to
select a mode you use regularly.
Update from DAB and FM use time signals broadcast with radio
transmissions. Update from Network uses a time signal sent from the
internet radio portal when connected to the internet.
Select Update from DAB | Update from FM | Update from Network
| No update.
Tenor will auto-update from the selected source when time information
is available.
If your country uses daylight saving, the automatically updated time from
the network may be wrong by one hour. You can turn on the Daylight
savings option to rectify this. If you are updating the time from DAB or
FM, the Daylight savings option has no effect on the clock’s time.
Getting started
Set time display
Auto-update
Set-up wizard
