25
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
WARNING:
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power supply
cable neeed to be replaced, this must be
carried out by our Service Force Centre.
The power supply cable must be easily
accessible after installing the appliance.
Important
Should the appliance power supply cable need to be
replaced, this must be carried out by a Service Force
Agent (see page 27).
Permanent connection
In the case of permanent connection it is necessary
that you install a double pole switch between the
appliance and the electricity supply (mains), with a
minimum gap of 3mm between the switch contacts and
of a type suitable for the required load in compliance
with the current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
Building-in
This appliance has been designed to be built into the
kitchen furniture. The recess should have the
dimensions shown in picture
A
.
Preparation and assembly of
the door
The machine is originally pre-arranged for the assembly
of a door opening from right to left.
P0
965
8
2
0
min
5
70
min.
6
00
596
4
1
6
17
6
,
5
818
54
1
1
95
49
0
1
6
0
1
2
0
9
0
8
5
1
5
1
65
A
6
00
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability
should this safety measure not be
observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate.
The rating plate is located at the top of the rim of the
open door.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
- Earth
Blue
- Neutral
Brown
- Live
The wire coloured green and yellow must be
connected to the terminal marked with the letter «E»
or by the earth symbol
or coloured green and
yellow.
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
GREEN & YELLOW
BROWN
CORD CLA
M
P
BLUE
13
A
P10
4
1
E
N
L
Mod. ..........
P
rod.
N
o. ...........
Ser.
N
o. .........
M
od. ..........
Pro
d. N
o. ...........
Se
r. N
o. .........
P00
4
2 BD
