9
Connection
Connection
Connection
Connection
Connection
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT:
IMPORTANT: This hob must be installed by a
competent person to the relevant Gas Standards.
Any gas installation must be carried out by a competent
person.
The manufacturer will not accept liability, should the
above instructions or any of the other safety instructions
incorporated in this book be ignored.
Carry out connection to the gas supply using a rigid metal
pipe with connections conforming to the rules in force, or
with a flexible s/steel tube conforming to the relevant rules in
force, limited to those whose max. length is 2 m. If flexible
metal tubes are used, make sure they do not come into contact
with mobile parts or are crushed. Pay the same attention also
when an oven and top combination is provided for. The
appliance gas inlet connection is 1/2" cylindrical threaded
male.
Screw the parts together without using excessive force.
IMPOR
IMPOR
IMPOR
IMPOR
IMPORT
T
T
T
TANT
ANT
ANT
ANT
ANT::::: After installation,
After installation,
After installation,
After installation,
After installation, al
al
al
al
alwa
wa
wa
wa
ways check
ys check
ys check
ys check
ys check
the perfect tightness of all the connections,
the perfect tightness of all the connections,
the perfect tightness of all the connections,
the perfect tightness of all the connections,
the perfect tightness of all the connections,
using a soapy solution. NEVER carry out this
using a soapy solution. NEVER carry out this
using a soapy solution. NEVER carry out this
using a soapy solution. NEVER carry out this
using a soapy solution. NEVER carry out this
check with a flame.
check with a flame.
check with a flame.
check with a flame.
check with a flame.
A
A
A
A
A) Gas ramp end with nut
B
B
B
B
B) Washer
C
C
C
C
C) Elbow
