25
Before any maintenance or cleaning can be carried
out, you must DISCONNECT the hob from the
electricity supply and wait until it has cooled down.
This appliance cannot be cleaned with steam or with a
steam cleaning machine.
The hob top
The hob top
The hob top
The hob top
The hob top
Regularly wipe over the hob top using a soft cloth well wrung
out in warm water to which a little washing up liquid has
been added. Avoid the use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily soiled, it is recommended
that proper cleaning product is used.
If scratches or cracks are noticed on the glass top,
immediately disconnect the appliance from the
electrical supply to avoid the risk of electrical shock.
Then, contact your local Service Force Centre and
avoid using the appliance until it has been repaired.
Pan supports
Pan supports
Pan supports
Pan supports
Pan supports
The pan supports are dishwasher proof. If washing them by
hand, take care when drying them as the enamelling process
occasionally leaves rough edges. If necessary, remove stubborn
stains using a paste cleaner.
Pay attention when replacing the pan supports in order
to avoid scratching the glass hob top.
The burners
The burners
The burners
The burners
The burners
The cap and the crown of each burner are secured with two
screws. To separate the two pieces, lift the cap, turn it upside
down, then undo the two fixing screws as shown in the
diagram.
After a thoroughly cleaning, reassemble the two parts and refit
the cap in its correct position on the burner.
Frequently
wash the burner caps and crowns using hot soapy
water and remove marks with a mild paste cleaner. A well
moistened soap impregnated steel wool pad can be used with
caution, if the marks are particularly difficult to remove.
For stubborn stains, use normal non-abrasive cleaners or
specific products available on the market. NEVER use scouring
pads, steel wool or acids for cleaning.
T
T
T
T
The
he
he
he
he ignition system
ignition system
ignition system
ignition system
ignition system
The electric ignition is obtained through a spark plug and a
metal electrode (letter A).
Keep these components clean, to avoid difficult lighting, and
check that the burner crown holes are not obstructed.
Maintenance and Cleaning
Maintenance and Cleaning
Maintenance and Cleaning
Maintenance and Cleaning
Maintenance and Cleaning
A
A
A
A
A -
Spark plug
B
B
B
B
B - Thermocouple
B
B
B
B
B
A
A
A
A
A
