15
Fig. 7
Fig. 7
Fig. 7
Fig. 7
Fig. 7
Fig. 8
Fig. 8
Fig. 8
Fig. 8
Fig. 8
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Fig. 6
Hanging furniture units or hoods must be placed at 650 mm.
minimum from the hob (Fig. 6).
The electronic gas hob can only be installed over a
built-in oven equipped with cooling fan.
If the hob is installed over a built-in oven equipped
with pyrolytic cleaning function, the hob must not be
in use while the pyrolytic cleaning cycle of the oven is
running.
a) removable panel
b) space for connections
Fig. 5
Fig. 5
Fig. 5
Fig. 5
Fig. 5
Building over a kitchen unit with door
Building over a kitchen unit with door
Building over a kitchen unit with door
Building over a kitchen unit with door
Building over a kitchen unit with door
Proper arrangements must be taken in designing the furniture
unit, in order to avoid any contact with the bottom of the
hob which can be heated when it is operated. The
recommended solution is shown in Fig. 5.
The panel fitted under the hob ("a") should be easily
removable to allow easy access if technical assistance is needed.
See also Fig. 2.
The space behind the kitchen unit ("b") can be used for
connections.
Dimensions are in mm
Dimensions are in mm
Dimensions are in mm
Dimensions are in mm
Dimensions are in mm
Building over a unit with an oven
Building over a unit with an oven
Building over a unit with an oven
Building over a unit with an oven
Building over a unit with an oven
The recesses for the hob and the oven must comply the
indication given in Figs. 6 and must be provided with openings
to allow a continuous supply of air.
Two possible solutions to avoid excessive overheating are
described in Fig. 7 and 8.
The electrical connection for the hob and the oven must be
carried out separately, for safety reasons and also to allow
the oven to be easily removed from the unit, if necessary.
Installation P
Installation P
Installation P
Installation P
Installation Possibilities
ossibilities
ossibilities
ossibilities
ossibilities
