21
How to programme a burner to
How to programme a burner to
How to programme a burner to
How to programme a burner to
How to programme a burner to
switch off
switch off
switch off
switch off
switch off
To programme a burner to switch off, proceed as follows:
1. If necessary, activate the hob by
touching the main ON/
OFF Control
for about 3 seconds.
2. Light the burner and adjust the flame level using the
Increasing
or Decreasing
controls (see par. “How
to light a burner”).
3. Activate the Timer by touching the Timer Control
and select the required burner by repeatedly touching
the Timer Control
.
4. Set the required cooking time touching the Increasing
and Decreasing
Controls
.
(max. time: 99 minutes).
Once the cooking time has been set, the burner
selection can no longer be changed.
If you want to change burner, you must set the cooking
time to zero by means of the Decreasing
control,
and then change the burner selection by touching
the Timer Control
.
5. The timerstarts the countdown a few seconds after the
cooking time has been set.
6. During the last ten seconds, the timer starts beeping to
advise that the cooking time is about to end.
7. An acoustic signal sounds at the end of the cooking time.
To stop the acoustic signal, touch the Timer
Control
.
T
T
T
T
To adjust the cooking time:
o adjust the cooking time:
o adjust the cooking time:
o adjust the cooking time:
o adjust the cooking time:
1. Touch the Increasing
or Decreasing
Control
or
at any time to adjust the time setting.
T
T
T
T
To cancel the time setting:
o cancel the time setting:
o cancel the time setting:
o cancel the time setting:
o cancel the time setting:
1. Touch the Decreasing
Control
to set the cooking
time to zero.
It is
possible to programme the switch-off of
ONL
ONL
ONL
ONL
ONLY
Y
Y
Y
Y
one burner at a time.
You can set the cooking time as well when the burner
is already lit.
For example, you can bring a pot of water to the boil,
then put some vegetables, meat or pasta and
programme the required time for their cooking.
The residual heat indicators remain on even when
the hob is off, until the burner and the pan supports
have cooled down.
"
