John Lewis JLBIGGH 704, Инструкция по эксплуатации

Страница: 10 / 28

10
Replacing the injectors Replacing the injectors Replacing the injectors Replacing the injectors Replacing the injectors
1. Remove the pan supports.
2. Remove the burner caps and crowns.
3. Using a 7 mm socket spanner unscrew and remove the
injectors , then replace them with the ones required for
the new type of gas (see the table “Burner characteristics”).
4. Reassemble the parts, following the same procedure
backwards.
5. Replace the Gas Type Label (located near the gas supply
connection) with the one corresponding to the new type
of gas. The label is supplied in the accessories plastic bag.
Should the feeding gas pressure be different or variable
compared with the required pressure, an appropriate pressure
regulator must be fitted on the gas supply pipe, in compliance
with the rules in force.
GAS BURNER INJECTOR NOMINAL REDUCED NOMINAL FEEDING
TYPE TYPE REFERENCE THERMAL THERMAL FLOW RATE PRESSURE
1/100 mm POWER POWER
kW kW m3/h g/h mbar
Rapid 119 2.9 0.65 0.276
Semirapid 96 1.9 0.45 0.181 - 20
Auxiliary 70 1.0 0.33 0.095 -
Rapid 86 2.7 0.65 - 196
Semirapid 71 1.9 0.45 - 138 28-30/37
Auxiliary 50 1.0 0.33 - 73
Burner characteristics Burner characteristics Burner characteristics Burner characteristics Burner characteristics
Con Con
Con Con Convvvvversion fr
ersion fr
ersion fr ersion fr ersion from Natural Gas to LPG
om Natural Gas to LPG
om Natural Gas to LPG om Natural Gas to LPG om Natural Gas to LPG
NATURAL
GAS (G20)
LIQUID
GAS
(Butane/
Propane)