John Bean 40HP210ES, Инструкция по эксплуатации

Страница: 19 / 31

11.0 FINAL CHECK OF ASSEMBLED LIFT
1. Check for air and hydraulic leaks. ___
2. Ensure all safety lock mechanisms are working correctly. ___
3. Check all fasteners, tighten if necessary. ___
4. Operate lift to full stroke then lower to ground while checking for proper
functionality. ___
5. Ensure Customer Care Kit is complete and given to operator. ___
a. Operation Manual ___
b. ANSI / ALI Lift It Right Manual ___
c. ANSI / ALI Safety Tip Card ___
d. ANSI / ALI ALIS Safety Requirements for Installation and Service
of Automotive Lifts ___
e. ANSI / ALI Quick Reference Guide ___
6. Train end user on operation of the lift. ___
18