Joerns
®
EasyCare
®
Bed Platform
Model ECS
17
Trapeze
(Figure 36)
1. We recommend using the Joerns
®
Trapeze with
the Joerns Trapeze Adapter.
2. Install the Trapeze assembly according to
manufacturer’s directions included with the
Trapeze.
Trapeze Adapter
(Figure 37)
1. The Trapeze Adapter is designed to allow
attachment of the Trapeze system to the
EasyCare
®
Bed. Prior to use, please read
important warnings related to this option and
follow all instructions below.
2. Install the Trapeze Adapter according to the
supplied instructions. If needed, call Technical
Support at 800-826-0270 for instructions.
3. Install the trapeze assembly onto the Trapeze
Adapter according to the trapeze manufacturer’s
instructions.
4. Operate the bed from its highest through lowest
positions to ensure proper clearance and
operation. Some trapeze systems may not be
suitable for use with the EasyCare Bed, due to
its low operating height.
5. Adjustment and use of a Trapeze should be in
accordance with instructions from a healthcare
professional (doctor or therapist).
6. Do not exceed the maximum load condition
listed on installation instructions.
4-Inch Extender
(Figure 38)
1. The 4-Inch Extender is designed to extend the
mattress support platform about four inches
to allow the use of an 84-inch mattress on an
80-inch mattress support platform or an 80-inch
mattress on a 76-inch mattress support platform.
Prior to use, please read important warnings
related to the Extender and follow instructions
below.
2. Install the 4-Inch Extender according to supplied
instructions. If needed, call Technical Support at
800-826-0270 for instructions.
3. Make sure the increase in overall length
does not produce a safety hazard or impair
accessibility in the room. Place the new mattress
against the Mattress Stop and be sure the
mattress covers the entire mattress support
platform length.
Figure 38
Figure 37
Figure 36
