Joerns
®
EasyCare
®
Bed Platform
Model ECS
12
EasyLift Leg Positioner Operation
EasyCare
®
5, 7 and 9
1. To raise: Grasp the bed’s foot deck and raise
to the desired position (Figure 30).
2. To lower: Grasp the foot end of the bed’s deck
and raise ½-inch to ¾-inch above present
notch, then lower gently;
3. Or, grasp the foot end of the bed deck, raise to
the highest position, and lower gently.
Servicing
EasyCare 3, 5 and 7
Warning: Possible Shock Hazard.
Unplug the
power cord from the wall outlet before performing
any maintenance/service to the power box.
Note:
Overload protection is achieved via current
sensing technology, which will reset automatically
if any bed function fails to operate. Ensure
that the bed is not overloaded or constrained
from movement.
Actuator and Control Box
Information
Cord and Socket Identification (Figures 31 and 32)
1. Back Actuator (yellow)
2. Knee Actuator (blue)
3. Hi-Lo Actuator (red)
4. Hi-Lo Actuator (red)
HB. Pendant (green)
B. Emergency Battery
C. AC Power In
Power Cord and Grounding
Connectors
Inspection of power cord and grounding
connectors should be conducted on a yearly basis
to ensure efficient bed operation.
1. Check the power cord to make sure it has
not been damaged. If the power cord needs
replacement due to damage, remove the bed
from use/service until the power cord has
been replaced.
2. Check the grounding connectors to ensure
they remain intact and are securely fastened
to their intended connection point.
Figure 30
B C
HB
4
2
1
3
Figure 32
1
2 3 4 HB
Figure 31
