background image

Joerns

®

 EasyCare

®

 Bed Platform

Model ECS

10

Figure 25

Staff Control Panel Operation

 

(Optional)

EasyCare

®

 3, 5 and 7 (Figure 23)

The Staff Control Panel allows caregivers to lock 

out all of the bed functions individually. Caregivers 

can also operate the bed from this panel without 

walking to side of the bed. 

1.  To lock out a function, press panel’s “no 

pendant” (Figure 23: #1, #3 and #5) icon. 

Illuminated red LED light indicates that the 

function is now locked out. 

2.  To unlock a function, press panel’s “pendant” 

(Figure 23: #2, #4 and #6) icon. Red LED is no 

longer illuminated, signaling that the pendant 

can now operate that specific function.

EasyCare 9 (Figure 24)

The Staff Control Panel allows the caregivers 

to operate the bed from the foot panel without 

walking to the bedside. The caregiver can also 

individually lock out all functions, both Pendant 

and Staff Control. 

1.  To lock out a function, press and hold the 

“Lock” graphic on the panel and push the 

function to lock out. Illuminated amber LED 

indicates that the function is now locked out. 

2.  To unlock a function, press and hold the “Lock” 

graphic on the panel and push the function to 

unlock. Amber LED is no longer illuminated, 

signaling that the function is now operable.

Pendant Lockout and Bed Operation

1.  Push button to lock out Back

2.  Push button to unlock Back

3.  Push button to lock out Knee

4.  Push button to unlock Knee

5.  Push button to lock out Hi/Lo

6.  Push button to unlock Hi/Lo

7.  Push button to raise Back

8.  Push button to lower Back

9.  Push button to raise Knee

10. Push button to lower Knee

11.  Push button to raise Bed

12. Push button to lower Bed

2

4

6

5

12

11

1

3

7

8

9 10

Figure 23

Standard Staff Control

1.  Push button to raise Back

2.  Push button to lower Back

3.  Push button to raise Knee

4.  Push button to lower Knee

5.  Push button to raise Bed

6.  Push button to lower Bed

7.  Push and hold to change lockout status in 

combination with another function button.

2

1

4

6

5

3

Figure 24

7

Roll in Low Lock System

EasyCare 3 and 5

1.  To keep the bed from rolling when in the lowest 

position, press down on the locking lever to lock 

casters (Figure 25).

2.  The standard caster set comes with two locking 

casters placed at opposing corners of bed.

Mobile 

Position

Locked  

Position

Swivel 

Casters

Roll in 

Low Lock 

System

Low only

Any Height 

(casters must 

be locked in 

Low)

Head & 

Foot (in Low 

position 

only)

Содержание ECS EasyCare 3





















Отзывы: