background image

16

Joerns® Bed Frames
EasyCare

®

 

© 2015 Joerns Healthcare • 6110158 RevC • 15-2537

Trapeze Adapter (Figure 35)

1. 

The Trapeze Adapter is designed to allow 

attachment of the Trapeze system to the 

EasyCare

®

 Bed. Prior to use, please read 

important warnings related to this option and follow 

all instructions below.

2. 

Install the Trapeze Adapter according to the 

supplied instructions.

 

3. 

Install the trapeze assembly onto the Trapeze 

Adapter according to the trapeze manufacturer’s 

instructions.

4. 

Operate the bed from its highest through lowest 

positions to ensure proper clearance and 

operation. Some trapeze systems may not be 

suitable for use with the EasyCare Bed, due to its 

low operating height. 

5. 

Adjustment and use of a Trapeze should be in 

accordance with instructions from a healthcare 

professional (doctor or therapist).

6.  Do not exceed the maximum load condition listed 

on installation instructions.

Drainage Bag Holder (Figure 36)

1.  The Drainage Bag Holder is designed as an 

attachment point for items such as urine collection 

bags. Make sure items attached to holder are 

safely secured. Prior to use, please read important 

warnings related to the Drainage Bag Holder and 

follow all instructions below.

2.  Install the Drainage Bag Holder and attach items 

to the Holder according to supplied instructions.

3.  It is important to operate all bed functions through 

their entire ranges to ensure that items attached 

to the Holder have proper clearance and are not 

pinched or caught.

4. 

Attach the Holder only to the point and position 

outlined in installation instructions. Operate all 

bed functions through their full ranges to ensure 

that items attached to the Holder have proper 

clearance and are not pinched or caught.

5. 

Many items that attach to the Holder are gravity 

fed and must be below bed user to function. Do 

not allow items suspended from the Holder to  

rest on the floor, particularly when the bed is in 

its lowest position. Otherwise, a safety condition 

may occur or the function of attached items may 

be impacted.

Figure 36

Figure 35

Содержание EasyCare



















Отзывы: