![JoeCo BLACKBOX BBR64Dante Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/joeco/blackbox-bbr64dante/blackbox-bbr64dante_user-manual_2021247016.webp)
Page | 16
BLACK
BOX
BBR
64
MADI
&
BBR
64
DANTE
RECORDER
- User Manual v3.0
would expect. Finish by pressing “Enter” on the keyboard. (Escape will cancel any
changes). The resulting tracks will be called
nnn-tt
.
Song Name
.WAV
where “
Song Name
” is the new name that you typed. This will rename all the tracks
of this song in this folder with this new Song Name. [Note: It is important for the
BlackBox to keep the
nnn-tt
prefix so that it knows which audio files belong together
as a Song and which track is to be played on each output channel. It also helps some
DAWs to place the tracks in their playlist in the correct order / position for playback.]
So for example, if the current song is 001(unnamed) and you decide to name it
“Codfish”, you will end up with the following files on your disk
001-01.Codfish.WAV
001-02. Codfish.WAV
001-03. Codfish.WAV
...
001-64. Codfish.WAV
Renaming tracks
To rename a track: use “Ctrl+
<digit><digit>
T” on the keyboard (where
<digit><digit>
is a number between 01 and 64 for selecting which track you want to name) then
type in the name that you want. The BBR will accept the same characters as for Song
Names, above. Finish renaming the track by pressing “Enter” on the keyboard (or
arrow up/down if you want to immediately name another track). The resulting tracks
will be called
nnn-tt.Song Name-Track Name
.WAV
where “
Track Name
” is the new name that you just typed. If you use the arrow down
the BBR will automatically move on to the next track so that you can rename it too.
You may want to name all the tracks similarly for
every Song that you’re going to record. At most
concerts, if the kick drum is plugged into channel
2 then it will remain that way for the whole
evening if not the whole tour. To facilitate this,
the Track Arm MENU and the Name Manager
MENU allow you to load the track names from an
existing Song and then use them as a template.
Select the Song which has appropriately named track as if for Playback (see above).