jobmate JMPRT550.1, Инструкция по безопасности и эксплуатации

Страница: 3 / 16

3
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5. Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
ADDITIONAL SAFETY
INSTRUCTIONS FOR YOUR
ROUTER AND TRIMMER
1. Hold power tool by insulated gripping
surfaces, because the cutter may contact
its own cord.
Cutting a “live” wire may make
exposed metal parts of the power tool “live”
and shock the operator.
2. Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Holding the work by your
hand or against the body leaves it unstable
and may lead to loss of control.
3. Draw attention to the necessity for using
bits of the correct shank diameter suitable
for the speed of the tool.
4. Recommendation that the tool always be
supplied via a residual current device with a
rated residual current of 30 mA or less.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
RCM marking