jobmate JMPRT550.1, Инструкция по безопасности и эксплуатации

Страница: 6 / 16

6
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the instruction book
carefully.
ASSEMBLY
WARNING: Before doing any assembly, switch the
tool off and unplug it from the power supply.
1. INSTALL OR REMOVE THE MAIN BODY
1) To remove the main body from the base, loosen the fixing
screw for main body by turning it anti-clockwise. Lift the main
body upwards. (See Fig. A1)
2) To install the main body onto the base, place the main body
downwards into the base hole, tighten the fixing screw for
main body by turning it clockwise. (See Fig. A2)
2. CHANGE THE CHUCK
You can attach the multi rotary cutting bits to the chuck nut
by using the chuck. The provided 3-size chucks are used to
attach corresponding different bits.
1) Press the spindle lock button. Twist the chuck nut anti-
clockwise to remove the chuck nut from the spindle. (See
Fig. B1)
2) Remove the chuck (if there is any) and insert a new one in.
(See Fig. B2)
NOTE: The chucks are symmetrically shaped and can be
inserted into the spindle from either end.
Fig.A1
Fig.A2
Fig.B1
Fig.B2
Fig.C2
Fig.C1
Fig.B3
Fig.C4
Fig.C3