jobmate JMPRT550.1, Инструкция по безопасности и эксплуатации

Страница: 8 / 16

8
7) Use the spanner to tighten the chuck nut clockwise firmly.
(See Fig. C4)
4. ADJUST THE CONTROL HANDLE
WARNING: It is important to hold the tool by using
the control handle, as the tool moves when cutting
and could otherwise pull away or stray over to the left. Hold
the tool with both hands will also afford you greater control
and cutting precision.
The easy-grip control handle is adjustable to suit the working
environment. •
You can place the control handle in:
• the horizontal position to use the tool like a normal back-
and-forth saw;
• the vertical position or at an angle to use the tool for cutting
freehand;
• the reverse position, it will provide a more comfortable and
practical grip for the hand task.
1) Loosen the control handle locking screw by turning it anti-
clockwise. (See Fig. D1)
2) Move the handle upwards or downwards into the desired
position. (See Fig. D2, D3)
3) Tighten the control handle locking screw by turning it
clockwise to fix the handle.
Fig.A1
Fig.A2
Fig.B1
Fig.B2
Fig.C2
Fig.C1
Fig.B3
Fig.C4
Fig.C3
a
Fig.D1
Fig.D2
Fig.D3
Fig.E1
Fig.F2
Fig.F1
Fig.E2
Fig.F4
Fig.F3