Jntech JNP22KH-V5, Руководство пользователя

Страница: 64 / 98

64
information items are located.
The following describes the operation information, basic information, pump
information, statistical information, and fault information.
8.3.1.1 operation information
The items in the operation information show the current operation information
of the inverter. The following table explains each item in detail.
Figure8-3 The meaning of main interface parameters
RunInfo Introduction
Vdc Inverter input voltage (V).
Ipv Inverter input current (A).
Ppv Inverter input power (W).
State-AC Current grid status of inverter (online/offline).
Pgrid Inverter current grid input power, unit W.
Igrid Inverter current grid input current (DC side), unit A.
Fout Inverter output current frequency (Hz).
Iuout Inverter output U phase current (A).
Ivout Inverter output V phase current (A).
Iwout Inverter output W phase current (A).
Temp Inverter radiator temperature, unit
℃
.
Errcode Inverter current fault code.
Stopcode
Stop code, can query the last stop code of the inverter,
according to the stop code can query the cause of the inverter
stop.
S-Mode Automatic/manual start and stop mode.
D-Mode Inverter dry mode detection/automatic
0F-F
Selection of water overflow alarm function in water storage
device of photovoltaic water pump system.