JNE TECH-D, Инструкция по эксплуатации

Страница: 3 / 25

___________________________________________________________________________
______________________________________________________________________________
3
TECH-D manual EN 2010-05-18.doc
1 INTRODUCTION
1.1 General
Congratulations on your purchase of the
TECH-D
vehicle measurement tool.
TECH-D is an digital measurement tool intended
for measuring and checking dimensional
accuracy of vehicle unibody and frame.
The tool consists the following main
components:
•
TECH-D measuring tool
•
chassis attachments
•
datum rods
•
height measuring rods
•
measuring sockets and tips
•
metal plate
•
Web based software access where you
type in measuring values from the tool
and produce reports.
See separate software manual
The measuring arm and its attachments and
measuring tips, together with web based
software , makes it possible to measure lengths
in 2 dimensions . You can also compare the
symmetry in height between left and right
side
in a very time effective way.
These instructions contain a description of the
equipment and directions for its use, handling
and maintenance.
IMPORTANT!
Read the instructions carefully in order to fully
understand the correct handling of the TECH-D
measurement.
The equipment is intended for use in the auto
body shop environment and in accordance with
all recognized official safety procedures.
Photos and drawings used throughout these
instructions depict the fundamental features and
design of the product at the time of publishing
and do not reflect potential future design
changes.