JNE TECH-D, Инструкция по эксплуатации

Страница: 14 / 25

___________________________________________________________________________
______________________________________________________________________________
14
TECH-D manual EN 2010-05-18.doc
2.10 Technical specification
Depending on if the measuring arm is pull out or
together, the accuracy of the level varies.
Refer to the table below for the amount of
change in height at the measuring head for each
graduation of movement in the level.
Extension in mm Change of height in mm
900 approx 0,5
1800 approx 1,0
2650 approx 1,5
Minimum and maximum measuring range.
The datum rods’ difference in height = 100 mm