___________________________________________________________________________
______________________________________________________________________________
3
BOR-ON 2008-10-07
1.2 Maintenance
A. General
BOR-ON is a precision instrument and it shall
therefore be handled with care so that the
measurement results are not jeopardized.
It is important that you follow the instructions
below and in general take the necessary steps
to protect the equipment.
B. Service
Always clean the tool after use.
NOTE! Use only a dry rag with no cleaning
agent.
Always keep the parts of the measurement
system in the storage box when they are not in
use. If the measurement tool ceases to function
or if some part has been damaged, contact your
local agent.
C. Control
At least once a year or when there is a
suspicion that the measuring system has been
damaged, it should be checked by your agent.
He has at his disposal a control instrument
which has been supplied by the manufacturer to
enable him to carry out such a control.
D. Disposal
If components of the measurement system are
scrapped or dismantled, components of plastic,
steel and aluminum and all electronic
components shall be separated for recovery.
