___________________________________________________________________________
______________________________________________________________________________
11
BOR-ON 2008-10-07
Enter Analyser test value
In the field ”Analyser test value” you fill out the
value given by the Analyser.
Mark area
Choose measured area on the schematic sketch
by hovering the area and left click.
Analyse
Measuring situation 2 is not mandatory to fill in
but you can of you have measured several
areas on the same vehicle and want them to go
on the same certificate.
When fields are filled in and areas are marked
click ”Analyse” to create the certificate.
1.
2. Hover the area and
click
3. The area is marked
