___________________________________________________________________________
______________________________________________________________________________
16
BOR-ON 2008-10-07
5. BATTERY
5.1 Change of battery
The BOR-ON Material Analyser is operated with
2 x 1.5 V button cell batteries.
The batteries are changed by carefully
unscrewing the battery case at the display end
of the Material Analyser.
The plus (+) pole on the batteries shall always
be in the direction towards the Analyser.
NOTE!
The BOR-ON Material Analyser is a sealed
unit (except for the battery case).
To avoid incorrect measurement values and
possible damage and to ensure that the
guarantee on the product is valid, the unit
must under no circumstances be opened,
dismantled, altered or adjusted in any way.
6. RESPONSIBILITY
6.1 Responsibility
JNE AB and other directly or indirectly involved
parties cannot be held responsible for any
damage or loss, which may arise through any
lack or deficiency in this information, or through
the design, performance or recommendations of
the product.
No part of this publication or the actual product
may be copied in any form, or be stored in any
other way in some system without the prior
permission of JNE AB. The right to change is
reserved.
