CDC160 DVD Case Wrapper
TP 000 103 - 6 -
SECTION 1: SPECIFICATION
Power supply:
115V 50/60Hz (VS4011) or
230V 50/60Hz (VS4010)
(see the manufacturer label near the power plug)
Fuse:
1.6 Amp Anti Surge
Capacity:
200 per hour for the manual operation, 400 per hour
for the automatic operation
Duty Cycle:
Continuous
Dimensions:
Height: 12.2” (310 mm)
Width: 21.9” (556 mm)
Depth: 22.4” (570 mm)
Gross Weight:
59.52lbs (27Kg)
Hopper capacity:
15 DVD cases
Polypropylene required:
Bi-Oriented Polypropylene (OPP)
Polypropylene size
:
6” (210mm) x10.5” (303mm), tolerance –0+0,5mm
Polypropylene thickness recommended:
00013” 32 Micron
Polypropylene wrapping sheets are available from JMV Robotique.
SECTION 2: INTRODUCTION & INSTALLATION
2.1 Introduction
The
CDC160
has been specially designed to provide a professional wrapping facility for DVD and
“Amaray” type cases. The semi-automatic operation is simple and effective using pre-cut sheets of
the polypropylene wrapping material. The first seal is affected manually and the finishing folds and
seal are completed automatically. The
CDC160
is a tabletop mounted unit, which can easily be
transported if required.
In order to achieve the very best result, ensure you are using pre-cut polypropylene sheets to the
exact size specified above. These can be ordered from JMV Robotique.
2.2 Installation
Your
CDC160
has been fully tested at the factory and our Quality Control Department has
ensured, before dispatch, that it performs satisfactorily to the full specification.
Carefully remove your
CDC160
from its shipping carton and verify that all parts are present. If
there are missing or damaged parts contact JMV Robotique or an authorized distributor
immediately.