JMV CDC160 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 21

JMV CDC160 Скачать руководство пользователя страница 20

CDC160 DVD Case Wrapper

TP 000 103 - 20 -

15. DEFAULT

If the Purchaser shall default in the performance of any of its obligations under the Contract JMV
Robotique shall on giving the Purchaser notice in writing have the right without prejudice to any other
rights or remedies to take all or any of the following actions:

a) cancel all or any part of any discount which might otherwise have been due under the terms of

the contract;

b) suspend any outstanding delivery of goods or parts thereof until such default shall have been

made good;

c) recover possession of that part of the goods to which the default relates and the Purchaser shall

allow JMV Robotique free access to his premises to enable JMV Robotique to do so.

No waiver or delay in exercise by JMV Robotique of its right under this clause shall be deemed to imply
acceptance of the default or any subsequent default. If the Purchaser shall become bankrupt, go into
liquidation, have a Receiving Order made against him, or carry on his business under a Receiver JMV
Robotique shall have the liberty without prejudice to any further remedies under the Contract to terminate the
Contract forthwith by notice in writing to the Purchaser or Liquidator and recover possession of all equipme nt
for which full payment of the contract price has not been received in c. above.

«
...
18
19
20
21
»

Содержание CDC160






















Отзывы:

Нет отзывов