JMV CDC160 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 21

JMV CDC160 Скачать руководство пользователя страница 4

CDC160 DVD Case Wrapper

TP 000 103 - 4 -

WARRANTY TERMS

The CDC160 is covered by the JMV Robotique standard warranty.

WARRANTY EXCLUSIONS

We will not provide warranty repairs if, in our opinion, the problem resulted from externally caused damage,

use outside the product’s specification, faults caused by inexperienced or non-approved repairers.

The warranty does not cover the replacement of used consumables (or of parts which need periodic
replacement during the life of the product as a result of the use made of them) unless the consumable itself
is defective.

Note:

Heater blocks are not covered by the warranty.

IF YOUR PRODUCT FAILS WITHIN THE WARRANTY PERIOD

•

Prepare a description of the problem you have had

•

Make sure you have your proof of purchase document (invoice or receipt.)

•

Contact your supplier

OPTIONAL EXTENDED WARRANTY PROGRAMMES

Optional extended warranty programs are available. JMV Robotique extended warranty programs can only
be purchased at the same time or shortly after the product to be covered has been purchased. Contact JMV
Robotique for details.

«
...
2
3
4
5
6
...
»

Содержание CDC160






















Отзывы:

Нет отзывов