CDC160 DVD Case Wrapper
TP 000 103 - 12 -
Figure 7
Hinge up the tray lid and remove the sleeved DVD case (figure 8). Taking care not to allow the
case to slide out of the sleeve, rotate the case 180 degrees left to right and place it in the hopper.
(figure 9)
Figure 8 Figure 9
Repeat the above procedure for at least two more cases, which is required to allow the hopper and
the second stage of the wrapping to function correctly.
Press the start/stop button on the control panel (figure 10) and the cases in the hopper will be
pushed forward one at a time between the side folders and heaters and ejected at the front of the
unit in a fully wrapped condition
(figure 11)
.