JML HaloWave, Руководство пользователя

Страница: 4 / 16

Safety Warnings & Advice
3 4
Unplug from the mains power socket when not in use.
Check the power cord and electric plug for signs of damage before
use. Do not use if damaged.
Always use the tongs provided to lift the racks in and out of the
bowl when hot.
Always use the handle to remove the glass lid from the glass bowl.
Ensure Halowave is clean and dry before use.
Only place food in Halowave before setting the timer or after pre-
heating.
WARNING! - Only use on a safe, stable, heat-proof work surface
and do not place near the edge of the worktop.
WARNING! - DO NOT touch the hot surfaces. Surfaces remain
hot even after Halowave is switched off.
WARNING! - When operating Halowave on a work surface keep
the surrounding areas clear and free from clutter. Ensure adequate
air space surrounding Halowave for circulation.
DO NOT operate Halowave with other major appliances plugged
into the same power socket – there is a risk of fusing the circuit.
DO NOT stare directly into the bulb.
DO NOT move Halowave when in use.
DO NOT immerse the glass lid, power cord or electric plug in water
or other liquids.
DO NOT use in a manner other than directed.
DO NOT leave Halowave unattended whilst in use.
DO NOT place Halowave on or near a hot gas or electric hob, or in
a heated oven.
DO NOT allow the power cord to hang over the edge of surfaces.
DO NOT allow the power cord to touch any hot surfaces.
HW_IM_I.indd 4 23/01/2018 10:11