JML HaloWave, Руководство пользователя

Страница: 12 / 16

Cleaning & Care
11 12
Caution: DO NOT
attempt to wash the glass bowl or lid until they cool down
to room temperature. If cold water is poured on the glass while it is still hot, it
could crack or break.
Self-cleaning - ‘Wash’
Halowave has a special self-cleaning setting, ‘Wash’, on the temperature control, which
should be used to wash the glass bowl:
1. Allow Halowave to cool.
2.
Remove any food and drain away any fat from the glass bowl.
3. Add approximately 1.5cm of cold water into the glass bowl with a squirt of washing up
liquid. Replace the glass lid and turn the temperature control to ‘Wash’.
4. Set the time control to 10-15 minutes, depending on how dirty the glass bowl is.
The combination of the heat, the swirling motion caused by the fan and the washing-up
liquid will clean the glass bowl quickly and efficiently.
The cooking racks can be left in the glass bowl when cleaning to soften any stuck-on
deposits.
5. Allow Halowave to cool.
6.
You may need to use a washing up brush to remove stubborn deposits before rinsing
and wiping dry.
General cleaning and care
Before cleaning, ensure Halowave is turned off, unplugged from the mains and has cooled down.
All parts EXCEPT the glass lid and the plastic basket are dishwasher safe.
DO NOT use abrasive cleaners or scouring pads on the metal or plastic surfaces.
The outer surface of the glass lid should only be wiped clean with a damp cloth.
Warning:
When hot, do not place the glass lid on or close to any flammable or combustible
items. It may cause fire or explosion.
HW_IM_I.indd 12 23/01/2018 10:11