Changing the bulb
11
12
A
B
E
F
G
H
I
J
D
C
Before you start: Unplug Halowave
and ensure the bulb and lid are cool.
1.
Take the lid off Halowave and lay it
down with the metal grill facing up.
2.
Locate the round screw hole on
the metal grill (
A
). Using a magnetic
Pozidriv screwdriver, remove the
screw (
B
).
3.
Grip the grill by the sides, twist anti-
clockwise (
C
), then lift away (
D
).
4.
The bulb is secured by three clips.
To unclip, push down on the curved
part of the clip with one fi nger, while
bending back the straight part with
another (
E
). Be careful of sharp
edges.
5.
Once unclipped, carefully push the
curved part back to release (
F
).
Unplug the bulb by pulling the plastic
plug up and away from the lid (
G
). Do
not unplug by pulling at the glass.
6.
To add the new bulb, fi rst bend down
the plug at a 90 degree angle so that
the pins point downward (
H-I
).
7.
Plug the new bulb into the lid, then
refasten the clips around the bulb.
8.
To replace the metal grill: line up the
three hooks on the grill with the three
slots on the lid, ensuring that the
screw hole on the grill will line up with
the hole on the lid. Push down and
then turn clockwise to fi t in place (
J
).
9.
Secure the screw back in place
through the screw hole (
A
).
HW_IM_I.indd 13
23/01/2018 10:11
Содержание HaloWave
Страница 1: ...HW_IM_I indd 1 23 01 2018 10 11...
