SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
31215079
3-33
Press evenly to avoid binding and damaging the seal.
Install seal support washer (28) and snap ring (29).
19. Install remaining plugs and fittings to the housing.
Refer to the drawing below for wrench sizes and
installation torques.
29
28
27
27. Shaft Seal
28. Seal Support Washer
29. Snap Ring
Figure 3-25. Shaft Seal
1/4 in
(45 Nm)
33 ft.lbs.
5/16 in
(85 Nm)
63 ft.lbs.
5/16in
(85 Nm)
63 ft.lbs.
1/4 in
(45 Nm)
33 ft.lbs.
9/16 in
(170 Nm)
125 ft.lbs.
3 mm
(2.03 to 3.39 Nm)
1.5 to 2.5 ft.lbs.
Figure 3-26. Plugs and Fittings Installation
Go
to
Discount-Equipment.com
to
order
your
parts
