SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
3-14
31215079
NOTE:
Make sure the retaining ring is securely seated in the
groove.
10. Place retaining ring (1I) over the spacer onto spindle
(1A) in hub (1G).
11. At this point the hub-spindle sub-assembly is com-
plete.
Main Assembly
BEWARE OF SHARP EDGES IN COUNTERBORE WHEN INSTALLING THE
O-RING.
1. Grease o-ring (5) and place it into the counterbore in
hub (1G).
NOTE:
O-ring may be stretched or pinched together to
make it fit the counterbore exactly.
2. Oil all exposed surfaces inside hub (1G).
3. Place internal gear (2) into hub (1G) so that its inter-
nal splines mesh with the external splines of spindle
(1A). Oil internal gear (2).
Go
to
Discount-Equipment.com
to
order
your
parts
