PAGE 21 of 35
BG0100 Rev 05.3
2.
Follow the cable placement, zipping the tube closed and closing the cable
management cable latch
(Fig. 66)
.
3.
Once the cable is placed the entire length of the tube, bring the zipper from
the tube’s opposite end, meeting at any point in the middle
(Fig. 67)
.
4.
When necessary, the two zippers may be opened to allow any cables to exit
the tube anywhere between the ends
(Fig. 68)
.
4.11.3. Clamp Setup
If the tube becomes disconnected
from the cable management dovetail
mount, follow these instructions to
re-attach the tube and dovetail mount.
1.
Loosen the clamp screw using the
supplied 3 mm hex driver.
2.
Slide the clamp around the tube
first, then slide the tube around the
outside of the cable management
dovetail mount
(Fig. 69)
. Align the
zipper opening and the cable
management dovetail mount
opening.
3.
Slide the clamp over the tube and
cable management dovetail
mount, pinching the tube in
between
(Fig. 70)
.
4.
Tighten the clamp screw
(Fig. 71)
.
Fig. 67
- Zip opposite end
Fig. 68
- Flexibility
Fig. 69
- Slide tube around mount
Fig. 70
- Slide clamp onto mount
Fig. 71
- Tighten clamp screw
Содержание STIX BGG008
Страница 1: ...STIX Magnetic Corrosion Scanner BG0100 Rev 05 3 ...
Страница 5: ...PAGE iv of iv ...
Страница 27: ...PAGE 22 of 35 Chapter 5 CONFIGURATION 5 1 Standard Configuration Fig 72 Standard configuration ...
Страница 41: ...Jireh Industries Ltd 53158 Range Road 224 Ardrossan Alberta Canada T8E 2K4 780 922 4534 jireh com ...