Jireh STIX BGG008, Руководство пользователя

Страница: 14 / 41

PAGE 9 of 35
BG0100 Rev 05.3
4.4.2. Mounting a Frame Bar
Ensure the two black wing knobs are loose
(Fig. 21)
. Slide the frame bar along
the dovetail nuts of the corrosion link
(Fig. 21)
. When the frame bar is positioned
where appropriate, tighten the two black wing knobs
(Fig. 22)
.
4.4.3. Index Encoder Connection
The index encoder connection
(Fig. 23)
is
located along the side of the corrosion
link. The cable from the PPS encoder
(see Index Encoder on page 18)
connects to this point.
4.4.4. Encoder Connection
The encoder connection
(Fig. 24)
is
located at the rear of the corrosion link.
The encoder cable connects here. The
opposite end of the encoder cable
connects to the user’s instrument.
Fig. 21
- Loosen wing knobs
Fig. 22
- Tighten wing knobs
Fig. 23
- Index encoder connection
Fig. 24
- Encoder connection