Jireh STIX BGG008, Руководство пользователя

Страница: 21 / 41

PAGE 16 of 35
5. Position the pivot buttons to the inside of the
probe holder arms
(Fig. 46)
.
6.
Place the probe holder arms on the
yoke and tighten the arm clamp screw
and probe holder adjustment knob
(Fig. 47)
.
7.
Use the supplied 3 mm driver to screw
the yoke to the probe holder.
TIP: When using a standard yoke
length, position the yoke in the
threaded hole closest to the
frame bar. When using a long
yoke length, position the yoke in
the threaded hole furthest from
the frame bar.
4.6.4. Yoke Substitution
1.
Loosen the arm clamp screw and the
probe holder adjustment knob allowing
removal of the probe holder arms
(Fig. 50).
2. Use the supplied 3 mm driver to unscrew
the yoke
(Fig. 51)
.
3.
Choose an alternate size of yoke and
screw the yoke to the outer probe holder
hole
(Fig. 52)
.
4.
Place the probe holder arms on the yoke
and tighten the arm clamp screw and
probe holder adjustment screw
(Fig. 49).
Fig. 48
- Screw into threaded hole
Fig. 49
- Alternate yoke size mounted
Fig. 50
- Remove probe holder arms
Fig. 51
- Remove yoke
Fig. 52
- Screw into outer threaded hole