PAGE 41 of 185
CX0540 Rev 00.1
4.5.3. Actuated Probe Lift
The actuated probe lift allows the probe to be
lifted from the inspection surface, preserving the
life or the probe as well as allowing travel over
small obstacles and large welds. The actuated
probe lift is compatible with various probe styles
and is available with either a flat or curved wear
plate.
4.5.4. Preamp
The preamp is used to amplify the return signal
from an ultrasonic transducer and improve the
signal-to-noise ratio for transmission over long
cables.
4.5.5. Optical Guide
The optical guide mounts to any dovetail and
provides a green colour point of reference useful
for guiding scanners along a given path
(i.e. a weld)
.
4.5.6. Tracker
The tracker is mounted atop any probe holder
frame and uses advanced laser guidance to follow
elevated profiles
(i.e. welds)
.
4.5.7. Battery Kit
The rechargeable battery provides portable power
to the crawler and components
(i.e. motorized raster
arm)
.
Fig. 117 - Actuated probe lift
Fig. 118 - Preamp
Fig. 119 - Optical guide
Fig. 120 - Tracker
Fig. 121 - Battery
