18
ICT connection (via radio)
Through a radio connectivity module, this Filtmaster fil-
ter cleaning controller model can command an ICT trans-
mitter that will open/close valves at long distances (see
ICT specifications).
In this case, this module can control 96 more valves by
simply connecting both devices.
This module includes the necessary cable.
The modem connection is easily done by using the appro-
priate cable supplied by JIMTEN.
In the male socket plug that must be connected to the
MODEM there are two works to be done.
RS232 connection
By using this connector, the controller can communicate
with a PC through modem or by cable for programming or
downloading data.
There are a large number of modems in the market. JI-
MTEN has officially approved different GSM modem mo-
dels for the Filtmaster filter cleaning controller.
If you have a different modem model, please contact
JIMTEN’s technical department to verify its compatibility.
Modem connection:
Wiring
Jumpers
PIN 2 MODEM CONNECTOR
PIN 1 CONTROLLER
PIN 6 MODEM CONNECTOR
PIN 2 CONTROLLER
PIN 9 MODEM CONNECTOR
PIN 3 CONTROLLER
PIN 7 WITH 8
PIN 11 WITH 12
NOTE
For the correct performance of the MODEM, the
PIN number request must be deactivated.
NOTE
The connection between both devices must be as
close as possible and the cable connecting them
must be outside the area of influence of any devi-
ce that may generate interference (power cables,
motors, etc.).
CONNECTIONS
JUMPERS
INPUTS
INPUTS
Operation and maintenance manual
