JH600 Maintenance Manual
Overview
-5-
The wire harness shall be clamped at the
position without contacting a part that generates
high temperature.
The wire harness shall be clamped at the
position without contacting the edge or sharp
corners of the vehicle body.
The wire harness shall be incapable of passing
through the position contacting a bolt, a screw
head or any front part.
The wire harness shall not be slackened or be
forcibly pulled.
If the wire harness has to contact the edge or
sharp corner parts, the contacting part shall be
protected with hose or adhesive tape.
In case of a wire harness with garland, it shall be
reliably harnessed.
Do not damage the garnish of the wire harness.
Once the wire harness is damaged, repair it by
coiling with plastic adhesive tape.
While mounting parts and components, do not
press the wire harness.
Do not touch!
Do not pull!
Pay attention
not to press it.
