JH600 Maintenance Manual
Overview
-6-
Do not mount wire harness with it twisted.
15. When wiring, note when turning it leftwards or
rightwards to the limit position, the wire harness
shall not be tightened up or slackened, and
make sure there is no significant bending,
pressing, intervening of marginal parts.
16. While using the test table, operate according to
the maintenance manual after understanding the
explanations in the instruction manual.
17. Do not drop or throw the parts and components.
18. In case of rust on the terminals, carry out
connection operation after disposing it with
abrasive paper, etc.
19. Do not forcibly twist or forcefully bend the cable.
Because a deformed or damaged cable is the
cause of bad operation and damage.
Rust must be
eliminated!
Have you learned by
heart the method of
application? Are the
measurement range and
polarity in accordance
with the instruction
manual?
