JH600 Maintenance Manual
Overview
-2-
Maintenance Precautions
1. Use only the spare parts, fittings, lubricating oil
and other auxiliary materials produced,
recognized or recommended by China Jialing
Industrial Co., Ltd. (Group). Using spare parts
not conforming to the “Jialing” specifications or
requirements may cause damage to the
motorcycle.
2. Whenever reassembling after being
disassembled, replace new washers, sealing
members, etc.
3. While fastening bolts or nuts, proceed in diagonal
crossing sequence to gradually screw down to
the required torque for 2 to 3 tries.
4. After being disassembled, the parts and
components should be cleaned before being
inspected and measured.
To clean the spare parts, use only the cleaning
fluid that is incombustible or has high ignition
point.
Before reassembling, apply the specified
lubricating oil to the sliding surface of the parts
and components.
After reassembling, check whether all the spare
parts are mounted properly by means of turning,
moving and operating them.
5. To disassemble and assemble a motorcycle,
special service tools (SST) and general-purpose
tools must be used in accordance with relevant
regulations.
6. The specified or equivalent lubricating grease
(oil) must be applied to or refilled into the
specified locations.
7. When 2 or more persons are carrying out the
operation, they shall work with each other and
pay attention to safety.
