JETWAY MI02 Series, Руководство пользователя

Страница: 32 / 41

28

PC Health Status
Press [Enter] to view current hardware health status, make further settings in
‘ SmartFAN Configuration ’ and set value in ‘ Shutdown Temperature ’.
► SmartFAN Configuration
Press [Enter] to make settings for ‘ SmartFan Configuration ’:
SmartFAN Configuration
CPUFAN / SYSFAN1 Smart Mode
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1 Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN1 full speed temperature. Fan will run at full
speed when above this pre-set temperature.
CPUFAN / SYSFAN1 Full-Speed Duty
Use this item to set CPUFAN/SYSFAN1 full-speed duty. Fan will run at full speed
when above this pre-set duty.
CPUFAN / SYSFAN1 Idle-Speed Temperature
Use this item to set CPUFAN/SYSFAN1 idle speed temperature. Fan will run at
idle speed when below this pre-set temperature.
CPUFAN / SYSFAN1 Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN1 idle speed duty. Fan will run at idle speed
when below this pre-set duty.

Serial Port Console Redirection
COM1
Console Redirection
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:

Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following items:
COM1
Console Redirection Settings
Terminal Type
The optional settings are: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].
Emulation:
[ANSI]: Extended ASCII char set; [VT100]: ASCII char set;
[VT100+]: Extends VT100 to support color, function keys, etc.; [VT-UTF8]: Uses
UTF8 encoding to map Unicode chars onto 1 or more bytes.
Bits per second
Use this item to select serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may require lower speeds.
The optional settings are: [9600]; [19200]; [38400]; [57600]; [115200].
Data Bits
The optional settings are: [7]; [8].
Parity
A parity bit can be sent with the data bits to detect some transmission errors.
The optional settings are: [None]; [Even]; [Odd]; [Mark]; [Space].