23
M.2
Port
Use this item to enable or disable M.2 SATA port.
The optional settings: [Disabled]; [Enabled].
*SATA
Port
*Note:
‘
SATA
’ & ‘
Hot Plug
’ items are optional for
MI02
series with
Q470E,W480E,H470
chipset)
.
Use this item to enable or disable SATA port.
The optional settings: [Disabled]; [Enabled].
*Hot Plug
*Note:
‘
SATA
’ & ‘
Hot Plug
’ items are optional for
MI02
series with
Q470E,W480E,H470
chipset)
.
Use this item to designate this port as Hot Pluggable.
The optional settings: [Disabled]; [Enabled].
PCH-FW Configuration
Press [Enter] to view Management Engine technology parameters and make
settings in the following sub-item:
TPM Device Selection
Use this item to select TPM device. When set as [PTT], it will enable PTT in
SkuMgr. When set as [dTPM], it will disable PTT in SkuMgr.
The optional settings: [dTPM]: [PTT].
Warning!
PTT/dTPM will be disabled and all data saved on it will be lost.
Firmware Update Configuration
Use this item to configure management engine Technology Parameter, press
[Enter] to make settings for ‘
ME FW Image Re-Flash
’.
ME FW Image Re-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
*AMT Configuration
*Note:
‘
AMT Configuration
’ is optional for
MI02
series with
Q470E,W480E,H470
chipset)
Use this item to configure Active Management Technology parameters.
Press [Enter] to make settings for the following sub-items:
USB Provisioning of AMT
Use this item to enable or disable AMT USB provisioning.
The optional settings are: [Disabled]; [Enabled].
CIRA Configuration
This item is for user to configure Remote Assistance Process parameters.
Press [Enter] to make settings for in the following sub-item:
Activate Remote Assistance Process
Use this item to trigger CIRA boot.
*Note
: Network Access must be activated first from MEBx Setup.
The optional settings are: [Disabled]; [Enabled].
*When set as [Enabled], user can make further settings in ‘
CIRA Timeout
’.
