Jetting JetLogger V0, Инструкция по безопасности, установке и эксплуатации

Страница: 16 / 20

How to set up a mail account on your tablet
Start the tablet and go to settings. Choose 'Accounts and backup', press 'Accounts' and then 'Add
account'. Follow the steps in the tablet.
The OCPC = Intelligent pipe/cable combination for optimal fiber blowing conditions
The JetLogger has an intelligent pipe/cable combination build in, the Optimal Cable Pipe Combination
system (OCPC system). The OCPC system is an intelligent system helping you to get the optimal pipe and
cable combination for optimal blowing.
The OCPC will automatically calculate the optimal cable/pipe combination, based on the fact that the
cable must not be more than 2/3 of the inner pipe diameter. It secures that you don’t choose a fiber that
is not suited for your choice of pipe size, for example trying to fit a fiber with a diameter that is too big for
the pipe. If you choose a pipe with a inner diameter size of 8,00 mm the OCPC system will only present
the cables which are optimal for this pipe size. It is possible for you to override the recommendation from
the OCPC system if you like.
BluSensor
The BluSensor will automatically monitor the surrounding temperature and humidity and transfer this
data to the JetLogger protocol via a Bluetooth signal. The BluSensor is parred with the tablet via a
unique ID-number, this is done during production. If you need to make a new connection, you'll find
the ID-number on the backside of the BlueSensor. The BluSensor is operated by a built in battery with a
15 year warranty. The battery is built in and can not be changed.
Low battery warning < 20 %
If the battery on the JetLogger is low, you will get a warning when the capacity hits 20 %. The warning
will flash, but you can still go on with your work. But you have to replace/recharge the battery
as soon as possible. You can not change the battery when you are doing a documentation process.
16
D A R E T O D O I T D I F F E R E N T L Y .