Jetting JetLogger V0, Инструкция по безопасности, установке и эксплуатации

Страница: 7 / 20

3. How to use JetLogger with V1/V2/V3
• The JetLogger system for model V1, V2, V3 is a stand alone system (Log Box) connected with the
machine by the supplied cable.
• Connect the machine and the Log Box with the supplied cable.
• Place the battery (Hitachi connector) on the left side of the Log Box.
• Connect compressor to the fiber blowing machine (remember to close the air valve and set the
emergency valve and regulator in closed position).
• Insert the pipe and cable used for the job.
• Start by switch on the power button on the battery holder (left side of the Log Box).
• Turn on tablet.
• Locate the JetLogger App and press on it to start the Log menu.
• How to start the JetLogger App, see section 4.
7
JetLogger Box for V1/V2/V3
D A R E T O D O I T D I F F E R E N T L Y .