Jetting JetLogger V0, Инструкция по безопасности, установке и эксплуатации

Страница: 10 / 20

6. Set up tablet for new session
• Start with pressing on 'New Session' in the main menu. This menu should appear :
• Fill out the items in the protocol (the yellow boxes must be filled in).
• Chose pipe. You will see the list of pipes that are stored in the memory. If not already
stored you can use 'Add pipe' either from the main menu or from the 'New Session Menu'.
• Type in the Color/Description of the pipe.
• Type in the pipe temperature (use a separate temperature measuring equipment).
• Chose cable. You will see the list of cables that are stored in the memory. If not already
stored you can use 'Add cable' either from the main menu or from the 'New Session Menu'.
• Type if you use cable tip (yes or no).
• Type the cable temperature (use a separate temperature measuring equipment).
• Note the meter marking from the cable and fill this into the protocol 'Start'.
• Chose the machine model; V0, V1, V2 or V3.
• Type in the lubricant specifications.
10
D A R E T O D O I T D I F F E R E N T L Y .